fzt 651q document number ds36917 rev. 2 - 2 1 of 7 www.diodes.com march 2015 ? diodes incorporated a product line of diodes incorporated fz t651q 60v npn high performance transistor in sot 223 description this bipolar junction transistor (bjt) has been designed to meet the stringent requirements of a utomotive a pplications . features ? b v ceo > 60 v ? i c = 3 a high c ontinuous c urrent ? i c m = 6 a peak pulse current ? low saturation voltage v ce(sat) < 3 00mv @ 1a ? complementary pnp type: fzt751 q ? lead - free finish; rohs c ompliant (note s 1 & 2 ) ? halogen and antimony free. green device (note ? qualified to aec - q101 standards for high reliability ? ppap c apable (note 4) mechanical data ? case: sot223 ? case m aterial : m olded p lastic . green m olding c ompound ; ? ul flammability rating 94v - 0 ? moisture sens itivity: level 1 per j - std - 020 ? terminals: finish - matte tin plated leads ; solderable per mil - std - 202, method 208 ? weight: 0.112 grams ( a pproximate ) ordering information (note s 4 & 5 ) product compliance marking reel size (inches) tape width (mm) quantity per reel fzt651 q ta automotive fzt 651 7 12 1 , 000 fzt651 q tc automotive fzt 651 13 12 4, 000 note s: 1 . eu directive 2002/95/ec (rohs) & 2011/65/eu (rohs 2) compliant. all applicable rohs exemptions applied. 2. see http://www.diodes.com/quality/lead_free.html for more information about diodes incorporateds definitions of hal ogen - and antimony - free, "green" and lead - f ree . 3. halogen - and antimony - free "green products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm tota l br + cl) and <1000ppm antimony compounds. 4. automotive products are aec - q10 1 qualified and are ppap capable. automotive, aec - q10 1 and standard products are electrically and thermally the same, except where specified. for more information, please refer to http://www.diodes.com/quality/product_compliance_definitions/ . 5. for packaging details, go to our website at http://www.diodes.com /products/packages.html marking information sot223 top view device symbol top view pin - out fzt 651 = product type marking code yww = date code marking y or y = last d igit of y ear (ex: 5= 2015) ww or ww = week c ode (01~53) fzt 651 sot223 green yww
fzt 651q document number ds36917 rev. 2 - 2 2 of 7 www.diodes.com march 2015 ? diodes incorporated a product line of diodes incorporated fz t651q absolute maximum ratings (@ t a = +25c, unless otherwise specified.) characteristic symbol value unit collector - base voltage v cbo 80 v collector - emitter voltage v ceo 60 v emitter - base voltage v ebo 7 v continuous collector current i c 3 a peak pulse current i cm 6 a thermal characteristics (@ t a = +25c, unless otherwise specified.) characteristic symbol value unit power dissipation (note 6) p d 2 w (note 7) 3 w thermal resistance, junction to ambient (note 6) r ja 62.5 c/w (note 7) 41.7 c/w thermal resistance, junction to leads (note 8) r jl 12.9 c/w operating and storage temperature range t j, t stg - 55 to +150 c esd ratings (note 9) characteristic symbol value unit jedec class electrostatic discharge - human body model esd hbm 4 ,000 v 3 a electrostatic discharge - machine model esd mm 400 v c notes: 6 . for a device mounted with the collector lead on 25mm x 2 5mm 2oz copper that is on a single - sided 1.6mm fr4 pcb ; device is measured under still air conditions whilst operating in steady - state. 7 . same as note 6 , except the device is mounted on 50mm x 50mm 2oz copper . 8. thermal resistance from junction to solder - point (at the end of the collector lead). 9. refer to jedec specification jesd22 - a114 and jesd22 - a115.
fzt 651q document number ds36917 rev. 2 - 2 3 of 7 www.diodes.com march 2015 ? diodes incorporated a product line of diodes incorporated fz t651q thermal characteristics and derating information 100 1m 10m 100m 1 10 100 1k 0 10 20 30 40 50 60 70 1 10 10m 100m 1 10 1 10 10m 100m 1 10 t amb =25c 25mm x 25mm 2oz fr4 v ce(sat) limit 100s 1ms 10ms 100ms 1s dc safe operating area i c collector current (a) v ce collector-emitter voltage (v) 0 20 40 60 80 100 120 140 160 0.0 0.5 1.0 1.5 2.0 2.5 3.0 50mm x 50mm 2oz fr4 25mm x 25mm 2oz fr4 derating curve temperature (c) max power dissipation (w) 100 1m 10m 100m 1 10 100 1k 0 10 20 30 40 50 t amb =25c 25mm x 25mm 2oz fr4 transient thermal impedance d=0.5 d=0.2 d=0.1 single pulse d=0.05 thermal resistance (c/w) pulse width (s) 100 1m 10m 100m 1 10 100 1k 1 10 100 25mm x 25mm 2oz fr4 50mm x 50mm 2oz fr4 safe o perating a rea single pulse t amb =25c pulse power dissipation pulse width (s) max power dissipation (w) d=0.1 d=0.05 single pulse d=0.2 d=0.5 t amb =25c 50mm x 50mm 2oz fr4 t ransient t herm al im pedance pulse width (s) thermal resistance (c/w) t amb =25c 50mm x 50mm 2oz fr4 100s 1ms 10ms 100ms 1s dc v ce(sat) limit v ce collector-emitter voltage (v) i c collector current (a)
fzt 651q document number ds36917 rev. 2 - 2 4 of 7 www.diodes.com march 2015 ? diodes incorporated a product line of diodes incorporated fz t651q electrical characteristics (@ t a = +25c, unless otherwise specified.) characteristic symbol min typ max unit test condition collector - base breakdown voltage bv cbo 80 c = 100 a collector - emitter breakdown voltage (note 10) bv ceo 60 c = 10 ma emitter - base breakdown voltage bv ebo 7 e = 100 a collector cut - off current i cbo cb = 6 0v cb = 6 0v , t a = +125c emitter cut - off current i ebo eb = 4 v collector - emitter saturation voltage (note 10) v ce(sat) c = 1 a, i b = 100 ma c = 3 a, i b = 300 ma base - emitter saturation voltage (note 10) v be(sat) 1.25 v i c = 1 a, i b = 100 ma base - emitter turn - on voltage (note 10) v be(on) c = 1 a, v ce = 2 v dc current gain (note 10 ) h fe 70 200 c = 50 ma, v ce = 2 v 100 200 300 i c = 500m a, v ce = 2 v 80 170 c = 1 a, v ce = 2 v 40 80 c = 2 a, v ce = 2 v current gain - bandwidth product (note 10) f t 140 175 ce = 5 v, i c = 100 ma , f = 100mhz switching times t on c = 500 ma, v c c = 10 v , i b 1 = i b 2 = 50 ma t off obo cb = 10v , f = 1mhz note : 10 . measured under pulsed conditions. pulse width 300s. duty cycle 2% .
fzt 651q document number ds36917 rev. 2 - 2 5 of 7 www.diodes.com march 2015 ? diodes incorporated a product line of diodes incorporated fz t651q typical electrical characteristics (@ t a = +25c, unless otherwise specified.) 1m 10m 100m 1 10 10m 100m 1 10m 100m 1 10 0.0 0.2 0.4 0.6 0.8 1.0 1m 10m 100m 1 10 0 100 200 300 1m 10m 100m 1 10 0.2 0.4 0.6 0.8 1.0 1.2 1m 10m 100m 1 10 0.2 0.4 0.6 0.8 1.0 1.2 i c /i b =100 v ce(sat) v i c tamb=25c i c /i b =50 i c /i b =20 i c /i b =10 v ce(sat) (v) i c collector current (a) 150c v be(sat) v i c i c /i b =10 100c 25c -55c v ce(sat) (v) i c collector current (a) 150c h fe v i c v ce =2v -55c 25c 100c gain i c collector current (a) 150c 25c v ce(sat) v i c i c /i b =10 100c -55c v be(sat) (v) i c collector current (a) 150c v be(on) v i c v ce =2v 100c 25c -55c v be(on) (v) i c collector current (a)
fzt 651q document number ds36917 rev. 2 - 2 6 of 7 www.diodes.com march 2015 ? diodes incorporated a product line of diodes incorporated fz t651q package outline dimensions please see ap02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version. suggested pad layout please see ap02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version. sot223 dim min max typ a 1.55 1.65 1.60 a1 0.010 0.15 0.05 b 0.60 0.80 0.70 b1 2.90 3.10 3.00 c 0.20 0.30 0.25 d 6.45 6.55 6.50 e 3.45 3.55 3.50 e1 6.90 7.10 7.00 e - - 4.60 e1 - - 2.30 l 0.85 1.05 0.95 q 0.84 0.94 0.89 all dimensions in mm dimensions value (in mm) c 2.30 c1 6.40 x 1.20 x1 3.30 y 1.60 y1 1.60 y2 8.00 a1 a 7 7 d b e e1 b1 c e1 l 0-10 q e 0.25 seating plane gauge plane x1 y1 y x c c1 y2
fzt 651q document number ds36917 rev. 2 - 2 7 of 7 www.diodes.com march 2015 ? diodes incorporated a product line of diodes incorporated fz t651q important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). d iodes incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or o ther changes without further notice to this document and any product described herein. diodes incorporated does not assume any liab ility arising out of the application or use of this document or any product described herein; neither does diodes incorporated convey any license unde r its patent or trademark rights, nor the rights of others. any customer or user of this document or prod ucts described herein in such applications shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on diod es incorporated website, harmless against all damages. diodes incorporat ed does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channe l. should customers purchase or use diodes incorporated products for any unintended or unauthorized application, customers shall in demnify and hold diodes incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising ou t of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized app lication. products described herein may be covered by one or more united states, international or foreign patents pending. product nam es and markings noted herein may also be covered by one or more united states, international or foreign trademarks. this document is written in english but may be translated into multiple languages for reference. only the english version of this document is the final and determinative format released by diodes incorporated. life support diodes incorporated products a re specifically not authorized for use as critical components in life support devices or systems without the express written approval of the chief executive officer of diodes incorporated. as used herein: a. life support devices or systems are devices o r systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided i n the labeling can be reasonably expected to result in significant injury to the user. b. a critical component is any component in a life support device or system whose failure to perform can be reasonably expe cted to cause the failure of the life support device or to affect its safety or effectiven ess. customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support d evices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety - related re quirements concerning their products and any use of diodes incorporated products in such safety - critical, life support devices or systems, notwithstanding any devices - or systems - related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporated and its representatives against any damages arising out of the use of diodes incorporated products in such safety - critical, life support devices or systems. copyright ? 201 5 , diodes incorporated www.diodes.com
|
